This page is near completion. Stay tuned for future changes and additions.


Bruton Backflow and Irrigation, LLC is primarily a backflow prevention assembly testing company that also maintains and services small, typically residential, irrigation systems. We care about our clients and the quality of the services we provide for them. It is difficult to cover all of the scenarios involved with services and pricing, but the following information should take most of the guess work out of it. We invite all to inquire further if any clarification is needed.

Basic Test Pricing

Standard* single backflow prevention assembly test------------------------------- $45.00

Standard* multiple assembly tests at same location each ------------------------ $40.00

Rush backflow test: Whatever combination of services, then add -------------- $30.00

Assemblies 2-1/2" and larger (require additional time for gate valves, alarms & chains and/or contacting an alarm company etc.) ---------------------------------$65.00

"Finals" Tests of new installs, 2" or smaller, report printed on site-------------- $55.00 

"Finals" Tests of new installs, Over 2", report printed on site---------------------$70.00

*Note: "Standard" means an approved assembly installed according to proper installation guidelines, Ground boxes and Vaults should be properly maintained so as to be accessible for testing, maintenance, and repairs. Proper assemblies include two usable handles and four functional test ports and access to all components needed to test or open and perform maintenance. See the images to the right for reference to some of these assemblies; they give good examples of what your assembly should look like. The images below give some practical examples of difficult assemblies to test.

   (See also service bundling & MVP discounts at the bottom of this page.)

 

Proper installations with standard test fees
Backflow testing in the NW can get tricky
Restricted by wires, pipes, roots
Pipe installed against cap
Pipe installed against cap
Test ports against box
Device access restricted
Hard handle to reach
buried w/ pipes over device

Assemblies needing maintenance, potentially increasing test costs

Images of Vaults and Confined Spaces

Hazzard Vault Pumped Out
Hazzard Vault Pumped Out
Deep Standing Water
Common Manhole Vault
Deep standing water
Deep Standing Water
Vaults and Confined Spaces

 

Each vault must be evaluated individually for hazardous atmospheric conditions and other safety concerns such as depth of vault without a ladder or deep standing water. Also many assemblies in vaults have alarms that must be put into test mode and chains with locks that must be unlocked. They also have large, hard to turn handles and stems. These conditions cause delays and increase testing or return trip costs. The following is a breakdown of our basic pricing, covering most of the circumstances we encounter.

 

Confined Space entry fee each-------------------------- $35.00

Test of 2-1/2" or larger assembly in confined space--$65.00

Any additional tests in same space each ------------- $40.00

Vault pump outs:

(depending on depth and time) --------------------- $25-50.00

 

Confined spaces with observed atmospheric hazards requiring additional personnel and safety equipment will be assessed individually and a quote will be given for acceptance before a test is performed.

 

Note: In this particular industry, confined spaces like unvented vaults or manholes with measurable atmospheric hazards are actually rare, but do exist. The vast majority we test in are charged at standard rates. We at Bruton Backflow however, will not compromise our safety for profit or put our clients liability at risk.

 

Backflow Prevention Assembly Maintenance & Repairs*

 

All Backflow Preventers have internal parts. Most are made of plastic and rubber and do wear out over time, or get any number of things caught in them causing the assembly to fail.

The proper operation of these parts is what the annual testing is all about. We offer services and new parts to maintain your backflow preventer in good working order, protecting all our drinking water from potential contamination. 

 

Failure of one check. Maintenance labor if done at time of initial test------$35.00

Failure of both checks. Maintenance labor in initial visit --------------------$65.00

Failure of both checks and relief valve, (RP) Maintenance labor - ----------$90.00

Failure of check and air inlet, (PVB/SVB). Maintenance labor ---------------$65.00

Plus parts costs for a check, air inlet or relief valve - approx -- $15.00-200.00 (depending on type, size and parts needed for proper operation)

IF REPAIRS REQUIRE AN ADDITIONAL SERVICE VISIT, A $10 TRIP CHARGE WILL BE ADDED TO THE ABOVE PRICE LIST.

 

If an assembly fails a test, our office we will contact you & provide an estimate and explain needed maintenance repairs. If we are retained to maintain or repair the assembly, the charge for the original test will be added to the total cost, ie: the original test+repair labor+repair parts. We leave any worn out, damaged or otherwise faulty parts with the assembly for our clients to inspect at their leisure.

 

*Note: Our licensing allows the repair of any "Non-Potable" Irrigation system plumbing, including lawn sprinklers/fountains/water features/ponds/sump pumps/ etc. Special licensing and training may be required to repair assemblies on  piping systems where people will be consuming the water they supply, (potable water lines).  In many of these cases only a licensed Plumber can perform "Plumbing" repairs on potable water systems. Bruton Backflow and Irrigation will advise on site.

Check Too Old
Check Fouled With Debris
Check Fouled With Deposits

Various irrigation images

(this gallery not yet populated, images to come

Automatic sprinklers watering grass

Irrigation Maintenance and Repairs

NOT ALL IRRIGATION SYSTEMS ARE CREATED EQUAL!

Basic System Adjustment:

Running a system zone by zone and evaluating all components for proper type, position and function. The goal for each individual zone is for the watering needs of the vegetation in that zone to be met when run for the appropriate amount of time. Most smaller systems, (up to 8 zones), that have not been neglected for long periods of time can be functionally adjusted in about 1 hour. Some take much longer and some are just a quick run through to see that everything is functioning as intended. Once a system is adjusted, (barring any significant event or abuse), it can be evaluated and adjusted in a very short time, usually about 1/2 hour.

All of the other services involving digging in the ground are subject to conditions as well, such as tree roots, rocks, concrete, pipes and wiring found underground, around or near components. The only thing that we can control is our approach to and execution of each individual task. We work as efficiently and diligently as we can to get the job done properly to save our clients expense. The hourly rate may seem slightly high but in the end, a job done properly in a timely manner is a savings. We also stand behind our work so that if there is a problem, we follow through to fix it.

 

Irrigation materials ----------------------------------------Retail + 30%

Irrigation hourly rate --------------------------------------- $150.00/hr

All jobs bid at ---------------------------------------- Labor + Materials

Each individual irrigation system has it's own characteristics and concerns. Many have been installed by "professionals" and many by home owners just trying to save some money. Therefore, each system must be evaluated individually, as no two systems are alike.

 

Call, email or click on the "place an order" button. We will respond promptly for clarification and to see if we are the right choice for your irrigation system needs.

Estimates and assessments generally take about 1/2-1 hour, depending on the size of the system and issues of concern. We schedule a minimum 1/2 hour at the $150/hr rate and then provide a formal estimate for the work to be done at another appointment date and time. 

Spring & Winter Seasonal Services

 

(TSO) Turn on system in spring: -------------------------------------------------------------------------------------------------------$45.00

     Check for any open components such as test cocks, hose bibs, drains and zone valves and turn system

     on, checking meter to confirm static condition and no active leaks.

 

(ADJ) Adjustment of an existing irrigation system------------------------------Prorated at $150.00 per hour plus parts (Minimum $75)

     Running a system zone by zone and evaluating all components for proper type, position and function. Replacing or repairing              parts as needed and setting timer if requested. Testing backflow assembly if requested. Most systems, 8 zones or less, take              about an hour.

(TOD) Turn off system and decompress: -----------------------------------------------------------------------------------------------$45.00

      a. Turn off primary shutoff, if available, and confirm fully off. If there is no primary shutoff or it is damaged,

          hidden or inaccessible, we will use the #1 shutoff of the backflow prevention assembly and confirm the

          water is fully off.

      b. Open remaining shutoffs of backflow assembly and open all test cocks and drains in backflow assembly

          box 45 degrees, (if they are ball valves and if they are usable), and cap all test cocks to keep assembly clean.

(TODO) Turn off, decompress and open full system: ----------------------------------------------------------------------------------$50.00

      a. Same as turn off and decompress plus:

      b. Search entire property for all visually available zone valves, drains or hose bibs and manually open all

          components allowing system to drain. Drainage of system is dependent on its design and installation.

(TODOI)Turn off and decompress, open full system and insulate all available ground boxes --------------------------------------$65.00

      a. Same as turn off, decompress and open full system plus:

      b. Add insulation to all visually available ground boxes for optimal protection of all components.

 

(BO) Full System Blowout -------------------------------------------------------------------------------------------------------------- $95.00

                                               ------------------------------------------------------------------------------------- each additional zone $12.00

      a. Turn off primary shutoff, if available, and confirm fully off. If there is no primary shutoff or it is damaged,          

          hidden or inaccessible, we will use the #1 shutoff of the backflow prevention assembly and confirm the 

         water is fully off.

      b. Connect to irrigation system with compressed air and thoroughly blow out all water for 100% guarantee

          against damage due to freeze. 

      c. Leave all components properly configured to just turn system on in the spring, saving time and expense.

Note: All services include a leak check at the meter to determine that the irrigation system is static before we leave. Also as a professional courtesy, if we see anything wrong with your system we will let you know.

Extremely large irrigation systems will incur added cost due to the extra time and materials needed to service these larger systems. Each larger system will need to be assessed for size, configuration, condition and cost.

Bundling Services

 

Depending on when your backflow test is due, you may choose to bundle the test with the corresponding seasonal service as follows: 

Backflow test plus spring system turn on when a TOD was performed the previous fall-----------------------------------$67.50 

Backflow test plus spring system turn on when a Blowout was performed the previous fall-------------------------------$67.50

 

Backflow test plus spring system turn on when a TODO was performed the previous fall----------------------------------$77.50

 

Backflow test plus spring system turn on when a TODOI was performed the previous fall ---------------------------------$77.50

 

Backflow test with either TSO or TOD, for first time service customers, minimum charge----------------------------$45 (covers test)                                                                                                                                              additional time if needed at regular $150/hr rate

Note: Larger, more complicated irrigation systems requiring additional time will be billed at our regular labor rate ---$150.00/hr

When an adjustment of an irrigation system is ordered with a backflow test, the test becomes part of the time it takes to perform the service and will be rolled into the adjustment, not charged separately ------------------------------------------ Labor + Materials

 

Note: When bundling services, if a backflow assembly fails, the regular repair rates will apply except when bundled with an irrigation adjustment. In that case the repairs will be part of the labor plus materials charged --------------------- Labor + Materials

                                             MVP OPTION

Backflow assemblies have a national annual failure rate of between 5 & 25%. Maintenance repairs can cost a minimum of $45-$65 and up for parts and labor.  For assemblies 2" and smaller you can opt to have these minor repairs completed at time of testing, if a failure occurs, without incurring the additional cost of a return trip or parts, by signing up for the contract MVP Option.

Test + labor + parts included, annual fee----------------------------------------------------------------------------------------------$50.00

when a TOD was performed the previous fall

PO Box 1927 Fairview OR, 97024
             503-618-1806
Hazzard Vault Pumped Out